HG8145V5
Copyright © Huawei Technologies Co., Ltd.
3 Indicator Description
Indicator Status Description
Power Steady on The ONT is powered on.
Off The power supply is cut off.
PON/LOS See the following table .
LAN1-LA
N4
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
Off The Ethernet connection is not set up.
TEL Steady on
The ONT is registered with the softswitch but no service
flows are transmitted.
Blinks twice
a second
The ONT is registered with the softswitch, and data is being
transmitted on the port.
Blinks once
every 2
seconds
The ONT fails to be registered with the softswitch.
Off The POTS port is disabled.
USB Steady on
The USB port is connected and working in the host mode,
but no data is transmitted.
Blinking Data is being transmitted on the USB port.
Off
The system is not powered on or the USB port is not
connected.
WLAN Steady on The WLAN function is enabled.
Blinking Data is being transmitted over the WLAN port.
Off The WLAN function is disabled.