3
Installing the GPON Terminal
1. Do not install GPON terminals outdoors or on the outdoor cabinets.
2. GPON terminals can be mounted onto a wall or be placed on a workbench. Do not install GPON
terminals in other modes, such as the ceiling.
3.The terminal cannot be connected to other devices such as GPON terminals, switch and router.
The schematic diagram for placing the device on a desk horizontally are as
follows:
Mounting a GPON terminal onto the wall
Step 1 Mark the positions of two holes (with a spacing listed in the following table) used
for mounting a GPON terminal.
Step 2 Select a proper drill according to the outer diameter of the screws. Use a
hammer drill to drill the marked positions on the wall. Then clean the wall and
install two expansion bolts.
Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads
of the screws 3 mm over the wall. Then install the GPON terminal to the screws.
To Next Page
Loading...
