Indicator Description
Table 1 Indicator status description 1
7
Indicator Status Description
CATV
Steady on
The CATV function is enabled and CATV signals are
received.
Off
The CATV function is disabled or CATV signals are not
received.
WPS
Steady on The WPS function is enabled.
Blinking A Wi-Fi terminal is accessing the system.
Off The WPS function is disabled.
WLAN
Steady on The WLAN function is enabled.
Blinking
Data is being transmitted.
Off The WLAN function is disabled.
USB
Steady on
The USB port is already connected but no data is
transmitted.
Blinks twice a
second
Data is being transmitted.
Off
The system is not powered on or the USB port is not
connected.
TEL1–
TEL4
Steady on
The connection between the TEL port and the voice
server is set up.
Blinks twice a
second
The connection between the TEL port and the voice
server is set up and the phone is in the off-hook or
ringing state.
Blinks once
two seconds
The TEL port is registering with the voice server.
Off
The connection between the TEL port and the voice
server is not set up.
LAN1–
LAN4
Steady on The Ethernet connection is in the normal state.
Blinking
Data is being transmitted on the Ethernet port.
Off
The Ethernet connection is not set up.
LOS/PON See Table 2.
POWER
Steady green
The terminal is powered on.
Steady yellow The backup battery is supplying power.
Off The power supply is cut off.
To Next Page
Loading...
