3 Installing an Infrared Waterproof Tube-Type IPC I
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 3-1 Sticking the positioning label
Positioning label
Please drill holes at the positions
marked by the red circles.
Step 2 Drill four holes with a diameter of 5.5 mm based on the marks on the positioning label. Drive
the expansion particles into the holes, as shown in Figure 3-2.
Figure 3-2 Installing the expansion particles
Step 3 Mount the IPC on the wall and fasten the screws, as shown in Figure 3-3.
To Next Page
Loading...