5 Installing a Vandal-Proof Dome IPC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 5-4 Installing white expansion particles
Three white expansion particles
Positioning label
A
B
A
B
A
B
Step 5 Remove the lower cover of the IPC. Align the three holes on the lower cover with three
expansion particles installed on the ceiling. Use three 30 mm black self-tapping screws to fix
the lower cover onto the ceiling, as shown in Figure 5-5.
Figure 5-5 Loosening the star screws
Three black self-tapping screws
Positioning label
Top cable outlet
Side cable outlet
A
B
A
B
A
B
Step 6 Route the multi-connector cable that is removed in Step 2, as shown in Figure 5-6.
To Next Page
Loading...