5 Installing a Vandal-Proof Dome IPC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 5-14 Disassembling the bracket and dome IPC
Upper cover Module Inner liner
Lower coverBracket
Step 2 Assemble the module that is equipped with the multi-connector cable, as well as the wall-
mounted bracket.
Route the multi-connector cable on the module through the elbow of the wall-mounted
bracket. Push the module into the wall-mounted bracket and rotate the module clockwise for
about five degrees until the module cannot be rotated any further.
Step 3 Use the three black screws that are removed in Step 1 to fix the module onto the wall-
mounted bracket, as shown in Figure 5-15. (Spare screws are available in the accessory kit of
the wall-mounted bracket.)
Figure 5-15 Fixing the black lower cover of the IPC onto the bracket
Multi connector cable-
Black screws
To Next Page
Loading...