Huawei IPE Series

To Next Page

To Previous Page

IPE

Installation Guide

6 Installing an Infrared Dome IPC

Issue 03 (2013-02-28)

Huawei Proprietary and Confidential

Figure 6-19 Installing the IPC on a ceiling-mounted bracket

Step 1 Disassemble the dome IPC and the bracket, as shown in Figure 6-20. The dome IPC consists

of an upper cover, a module, an inner liner, and a lower cover. The lower cover is not used for

this installation mode.

NOTE

For details about how to disassemble the dome IPC, see Step 1 and Step 2 in section 6.2.1 "Installing the

IPC on the Ceiling."

Huawei IPE Series - Page 68