6 Installing an Infrared Dome IPC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Figure 6-20 Disassembling the bracket and dome IPC
Bracket Lower cover
Upper cover Module Inner liner
Step 2 Assemble the module that is equipped with the multi-connector cable, as well as the ceiling-
mounted bracket.
Route the multi-connector cable on the module through the straight pipe of the ceiling-
mounted bracket. Push the module into the ceiling-mounted bracket and rotate the module
clockwise for about five degrees until the module cannot be rotated any further.
Step 3 Use the three black screws that are removed in Step 2 to fix the module onto the ceiling-
mounted bracket, as shown in Figure 6-21. (Spare screws are available in the accessory kit of
the ceiling-mounted bracket.)
Figure 6-21 Fixing the module onto the bracket
Multi connector cable-
Three black screws
To Next Page
Loading...