Huawei K562 - Ports and Buttons

Ports and Buttons
No. Interface or
button
Description
1 WPS Enables the WPS pairing function.
2 Network ports The port is auto-negotiated to a LAN port when
connected to a computer or STB, and to a WAN port
when connected to the LAN port of an Internet
gateway.
3 Power Connects to the power adapter.
4 Reset button When the K562 is starting, use a needle-shaped
object to press and hold this button for more than 2
seconds until indicator turn o. After the device
restarts and the indicator turns on, the factory
settings are restored.
NOTE
Exercise caution when pressing the button. If you cannot
access the Internet after the device is restored to factory
settings, contact your service provider for help.
NO TE
● The K562 can only be used indoors. It can be mounted be placed horizontally on a
desktop. Do not install it in other modes, such as on the ceiling.
● Keep a clearance of more than 10 cm around the device to ensure proper ventilation.
● Keep the device away from electric appliances that generate strong magnetic or electric
elds, such as microwave ovens.
● The gures shown in this document may dier from the actual products, but the
dierences do not aect the functions of the products.
K562
Quick Start-02 1 Product Overview
Issue 02 (2021-06-25) Copyright © Huawei Technologies Co., Ltd. 2