6
• The M6x60 expansion bolts delivered with the battery are mainly used for solid concrete walls
and concrete floors. If other types of walls and floors are used, ensure that the walls and floors
meet the load-bearing requirements (one battery expansion module weighs 50 kg) and select
the bolts by yourself.
• The power control module (DCDC) must be fixed on the wall. If the device is installed
in an area prone to earthquakes or vibration, you can mark the battery module
mounting holes and drill holes to install expansion bolts in step 2.
Keep a distance of
10 mm to 15 mm
between the support
and the wall surface.
Align the
marking-off
template with the
upper surface of
the floor support.
Ground
Level
Mounting holes for the
15 kWh module
Mounting holes for the
10 kWh module
Mounting holes for the
5 kWh module
Wall
Baseboard
Marking line
(Optional)
Pack
mounting
holes
If holes cannot be drilled on the ground, the battery expansion
modules must be secured on the wall.
To Next Page
Loading...
