Huawei LUNA2000-2.0MWH-2H0 - Optional) Filling the Fire Cylinder with Extinguishant

Figure 4-11 Installing copper bars between battery packs
Step 4 Close the battery pack cover.
Step 5 Close the battery cabin door.
----End
4.3.2 (Optional) Filling the Fire Cylinder with Extinguishant
NO TE
This step applies only to some models.
CA UTION
● This document does not provide details about how to ll the re cylinder with
extinguishant. Perform this operation in a dedicated station.
● Protect the re cylinder from collision during transportation and installation.
Step 1 Remove the hose active connector from the ESS piping using a torque wrench.
Step 2 Remove the extinguishant release hose from the high-pressure elbow using a
torque wrench.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 4 Installation
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 106