31
• The appearance of the solenoid valve is for reference only, and that of the actual product
may vary.
• The model of the solenoid valve may vary. For details about the applicable installation
procedure, see the model of the fire cylinder.
1. Remove the solenoid valve from the bracket.
2. Remove the screws using a screwdriver and remove the electric control plug from the
solenoid valve.
3. Tighten the solenoid valve clockwise to the top of the fire cylinder.
4. Insert the electric control plug and tighten the screws using a screwdriver.
5. Remove the safety pin.
Scenario 1
Scenario 1 is applicable to a 40 L cabinet-type fire cylinder.
To Next Page
Loading...
