LUNA2000-(5-30)-S0
User Manual
Copyright © Huawei Technologies Co., Ltd.
Figure 4-7 Wall-mounted installation dimensions
Procedure
Step 1 Determine the positions for drilling holes using the marking-off template. Level the positions
of mounting holes using a level, and mark the positions with a marker.
Step 2 Install the mounting kit.
When drilling holes, avoid the water pipes and power cables buried in the wall.
M12x60 expansion bolts delivered with the battery are used to fix the wall mounting support. If the
length and quantity of the bolts do not meet installation requirements, prepare M12 stainless steel
expansion bolts by yourself.
M6x60 expansion bolts delivered with the battery are used to fix the power control module. If the length
and quantity of the bolts do not meet installation requirements, prepare M6 stainless steel expansion
bolts by yourself.
To Next Page
Loading...
