Huawei LUNA2000-5KW-C0 - Installing DC Input Power Cables

LUNA2000-(5-30)-S0
User Manual
5 Electrical Connection
Issue 01 (2020-09-18)
Copyright © Huawei Technologies Co., Ltd.
53
Figure 5-7 Grounding the PE cable

It is recommended that silica gel or paint be used around the ground terminal after the PE cable is
connected.
----End
5.3.2 Installing DC Input Power Cables
Connect DC input power cables to the inverter
Insert the positive and negative battery connectors (Staubli) into the corresponding DC input
terminals (BAT+ and BAT–).
The DC input terminals (BAT+ and BAT–) on the left and right sides of the battery are the same.
Step 1 Assemble DC connectors.