Huawei Mate 20X 5G User Manual

Use NFC to Quickly Establish Connections between Devices
Place the NFC detection areas of your two devices close together to quickly establish a Bluetooth or
Wi-Fi connection between them. You can also use this method to establish a Wi-Fi Direct connection
or to share a Wi-Fi hotspot without the trouble of searching for devices, pairing, and manually
entering connection details.
NFC
For example, when pairing Bluetooth devices, enable NFC, Huawei Beam, and Bluetooth on both
devices. Open the Bluetooth pairing screen on both devices and place the NFC detection areas of
devices close together. When the transmitting device plays an audio prompt and the transmitting
screen shrinks, follow the onscreen instructions and touch the screen on the transmitting device to
establish a Bluetooth connection.
If there is a
Read and write/P2P switch on the NFC screen, ensure that it is also enabled.
Features may vary depending on your network provider.
Huawei Share
Use Huawei Share to Quickly Share Files between Huawei Devices
You can use Huawei Share to quickly transfer photos, videos and other les between Huawei devices.
Huawei Share uses Bluetooth to detect other nearby Huawei devices and then uses Wi-Fi Direct to
quickly transfer les without using mobile data.
Device Connection
77

Huawei Mate 20X 5G Specifications

General

Display	7.2 inches
Resolution	1080 x 2244 pixels
Processor	HiSilicon Kirin 980
RAM	8 GB
Storage	256 GB
Rear Camera	40 MP (wide) + 20 MP (ultrawide) + 8 MP (telephoto)
Front Camera	24 MP
Battery	4200 mAh
Operating System	Android 9.0 (Pie), EMUI 9.1
5G Support	Yes
CPU	Octa-core (2x2.6 GHz Cortex-A76 & 2x1.92 GHz Cortex-A76 & 4x1.8 GHz Cortex-A55)
GPU	Mali-G76 MP10
Network	GSM / HSPA / LTE / 5G
Weight	233 g (8.22 oz)
Dimensions	174.6 x 85.4 x 8.4 mm (6.87 x 3.36 x 0.33 in)
Operating System Upgradable	Yes, upgradable to Android 10