Huawei MRD-LX1F User Manual

Dual Card Dual Standby Single
Pass
Your device supports only dual card dual standby single pass,
which means you cannot use both SIM cards for calls or data
services simultaneously.
l When you are on a call using SIM card 1, SIM card 2 cannot
be used to make or answer calls. If someone calls SIM card
2, the caller will hear a voice message similar to "The
subscriber you dialed is out of the service area" or "The
subscriber you dialed cannot be connected for the moment,
please try again later." The actual message will vary by
service provider.
l When you are using SIM card 1's data service, SIM card 2's
data service will be disabled.
Your device's single pass feature helps reduce power
consumption and increase your device's standby time. It is not
related to your service provider's network conditions.
l You can enable call forwarding between SIMs on the
device to avoid missed calls.
3

Huawei MRD-LX1F Specifications

General

Display Size	6.09 inches
Display Resolution	720 x 1560 pixels
Processor	Mediatek MT6761 Helio A22
RAM	2 GB
Internal Storage	32 GB
Rear Camera	13 MP
Battery	3020 mAh
SIM	Dual SIM (Nano-SIM, dual stand-by)
Weight	150 g
Model	MRD-LX1F
Front Camera	8 MP
Operating System	Android 9.0 (Pie)
Dimensions	156.28 x 73.5 x 8 mm