Configure an IP phone. The following de
phone. For details about other models, s
1. Enter the IP address of the IP phone
can click OK on the IP phone to view
2. Enter the user name and password (
and click Log In to access the web m
3. Click the Account tab. Set Register
based on the data plan in step . S
address of the LAN port on the EGW
4. Click Submit to finish IP phone confi
7
a
system of the EGW1520 to view the
Verify the configuration according to the
document.
8
Starting Configuration —— IMS/
a
Planning SIP Server Data
Item Description
Type of the SIP server
address
The address can be an IP
from the network carrier.
SIP server address
IP address or domain na
network carrier. For exam
v
y
Heartbeat detection
interval
Interval for the EGW1520
in seconds. The value ran
recommended.
Registration interval
Interval for the registratio
this group to the SIP serv
The value ranges from 0 t
Assume that the EGW1520 connects to the
user-by-user registration.
To obtain the registration group type, trun
user name, IMS domain name, external n
contact the network carrier. When the SIP s
Planning the Registration Group
b
name blank.
Registration
Group ID
Registration
Group Type
Trunk Registrati
User ID
0
User-by-user
registration
+8657187654321
1
User-by-user
registration
+8657187654322
2
User-by-user
registration
+8657187654323
... ... ...
cribes how to configure an eSpace 78xx IP
e the appropriate administrator guide.
n the address box of Internet Explore
(You
the IP address of the IP phone).
efault values: admin) of the administrator
anagement page.
ame to the user number of the IP phone
t SIP Server to 192.168.1.1 (default IP
520).
uration.
egistration status of the IP phone.
hapter Verifying Configuration in this
GN Access Gateway
address and or a domain name. Obtain the type
e of the SIP server. Obtain the address from the
le, the value can be 191.1.1.1 or m04.huawei.com.
Obtain the t pe from the net ork carrier
.
y
w
.
to send heartbeat messages to the active SIP server,
es from 10 to 900. The default value 60 is
group to send registration messages for users in
r, in seconds.
14400. The default value 360 is recommended.
IMS, and the registration group type is
k registration user ID, trunk registration
mbers, Authentication and Password,
rver t
e is NGN
leave the IMS domain
n Trunk Registration
User Name
IMS Domain
Name
+8657187654321@abc.
def.com
abc.def.com
+8657187654322@abc.
def.com
abc.def.com
+8657187654323@abc.
def.com
abc.def.com
... ...