Huawei OptiX OSN 8800 T16 - Page 35

32
9 Installing the Y-Cable
Subboard
Install the chassis to the cabinet. Install the PGND cable.
In a 19-Inch Cabinet
a
The Y-Cable consists of six subboards, each of which can be separately installed. A filler panel needs to be
inserted in a slot that is not equipped with a subboard.
Insert a subboard into the specified slot of the Y-Cable along the guide rail and tighten the screws on the front
panel of the Y-Cable.
0.39±0.04N.M
M3
2# screwdriver
2.04±0.20N.M
M6
2# screwdriver
1.43±0.14N.M
M4
2# screwdriver