29
Powering On the Equipment
Status Description of Indicators
Indicator Status Description
PWR Constantly on and green The power is functioning properly.
Off The power supply fails.
ALM Constantly on and green The board is being initialized.
Constantly on and red The power board reports an alarm.
Off No alarm is reported.
FAN Normally on in green color The fan is functioning properly.
Constantly on and red The fan is malfunctioning.
Off The fan is powered off.
Check and ensure that the STAT indicators on the system control, switching, and timing board are on in green
color.
Before powering on the equipment, ensure that the installation of the ODU is completed and the ODU
switch on the IF board is set to the OFF state.
CAUTION
To Next Page
