Huawei OptiXstar V183 - Indicator Description

4 Indicator Description
Indicator Status Description
Indicator on
the front
panel
(above the
logo)
Steady on ● Steady red: The device is being powered on,
or the device has been started but is not
connected to the Internet.
● Steady white: The device is started and
connected to the Internet.
O The device is powered o.
PON/LOS See the following table.
LAN1-LAN4
(with LED
indicators)
Steady on The network port is connected, but no data is
being transmitted.
Blinking The network port is connected and data is
being transmitted.
O The network port is not connected.
TEL Steady on The telephone service is enabled.
Blinking The phone is being used.
O The telephone service is disabled.
USB Steady on The USB port is connected, but no data is
being transmitted.
Blinking Data is being transmitted over the USB port.
O The USB port is not connected.
WLAN Steady on The WLAN function is enabled.
Blinking Data is being transmitted.
O The WLAN function is disabled.
WPS Steady on WPS authentication is enabled.
Huawei OptiXstar V183
Quick Start 4 Indicator Description
Issue 01 (2023-04-28) Copyright © Huawei Technologies Co., Ltd. 7