Huawei OptiXstar V183 - Page 11

Indicator Status Description
Blinking Terminals such as mobile phones are accessing
the network.
O WPS authentication is disabled.
FTTR Steady on Optical signals are detected on at least one
downstream Slave FTTR.
O No ber is connected or no optical signal is
received.
Status
No.
PON Status LOS Status Description
1 Blinking
rapidly
(twice per
second)
O The device is attempting to connect to
the upper-layer device.
2 Steady on O The device is connected to the upper-
layer device.
3 O Blinking
slowly
(once every
two
seconds)
No ber is connected or no optical signal
is received.
4 Blinking
slowly
(once every
two
seconds)
Blinking
slowly
(once every
two
seconds)
Indicates a hardware fault.
Huawei OptiXstar V183
Quick Start 4 Indicator Description
Issue 01 (2023-04-28) Copyright © Huawei Technologies Co., Ltd. 8