No. Port/Button Description
1 On/O Turns on or o the device.
2 Power Connects to a power cable.
3 USB Connects to a USB device.
4 Reset Restarts the device.
When the device is started, use a needle-type object to
press this button to restart the device. Press and hold this
button for more than 10 seconds to restore factory
settings and restart the device.
5 LAN1 to
LAN4
Connects to a computer, IP STB, or router and supports
10/100/1000 Mbit/s auto-sensing.
6 TEL Connects to a telephone or fax machine.
Huawei OptiXstar V183
Quick Start 3 Connecting Cables
Issue 01 (2023-04-28) Copyright © Huawei Technologies Co., Ltd. 5
To Next Page
Loading...
