Huawei P smart Z User Manual

Dialling
Basic Calling Functions
Make Calls
On the dialler screen of your device, enter part of the phone number, the rst letter of the contact's
name, or the contact's initials to nd a contact.
Open Dialler. From the dialler screen, enter the phone number, the rst letter of the contact's
name, or the contact's initials (for example, enter "jl" for John Lucas) to nd a contact. Touch the
contact you want to call from the list. If you are using a dual-SIM device, touch
1
or
2
to make
the call. Touch to hang up.
You will be prompted to paste recently copied phone numbers when you enter the dialler screen.
Press the Power button to hang up: If a number has been dialled accidentally and the call screen is
hidden, you can still hang up quickly. The Power button ends call feature hangs up the call when
the Power button is pressed. On the Dialler screen, go to > Settings > More, and enable
Power button ends call.
Enable Call Waiting to Never Miss Important Third-Party Calls
Receiving an incoming call while you're already on a call? Call waiting allows you to answer the new
call and then switch between the two calls.
Some network providers may not support this feature.
Open Dialler, go to > Settings > More, and enable Call waiting. When receiving another
call, touch to answer the call and place your rst call on hold. Touch or the call on hold in the
call list to switch between calls.
Enable Call Forwarding and Never Miss a Call
If you are unavailable to answer calls, you can set your device to forward calls to another number.
Some network providers may not support this feature.
Open Dialler, and go to > Settings > Call forwarding. If you have a dual-SIM device, in the
SIM 1 or SIM 2 section, touch Call forwarding and select a forwarding method. Enter the number
you want to forward your calls to, then conrm. When call forwarding is enabled, your device will
automatically forward eligible calls to the preset number.
Delete Call Logs
You can delete call logs that you no longer need.
23

Huawei P smart Z Specifications

General

RAM capacity	4 GB
Memory card slot type	Hybrid slot
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	512 GB
Internal storage capacity	64 GB
Color name	Midnight Black
Form factor	Bar
Product color	Black
Wi-Fi	Yes
4G standard	LTE
2G standards	GSM
3G standards	WCDMA
SIM card type	NanoSIM
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
SIM card capability	Hybrid Dual SIM
Mobile network generation	4G
Platform	Android
Operating system installed	Android 9.0
Panel type	LTPS
Screen shape	Flat
Pixel density	391 ppi
Display diagonal	6.59 \
Touch technology	Multi-touch
Touchscreen type	Capacitive
Display resolution	2340 x 1080 pixels
Native aspect ratio	19.5:9
Display number of colors	16.78 million colors
Graphics card	Mali-G51
Wireless charging	-
Flash type	LED
Rear camera type	Dual camera
Front camera type	Single camera
Video recording modes	1080p
Rear camera aperture number	1.8
Front camera aperture number	2.2
Front camera resolution (numeric)	16 MP
Second rear camera resolution (numeric)	2 MP
USB connector type	USB Type-C
Subscription type	No subscription
Talk time (3G)	- h
Battery capacity	4000 mAh
Processor cores	4
Processor family	Hi-Silicon
Processor frequency	2.2 GHz
Coprocessor frequency	1.7 GHz
Processor lithography	12 nm
Processor architecture	ARM Cortex-A73
Coprocessor architecture	ARM Cortex-A53
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Harmonized System (HS) code	85171300
Head SAR (EU)	0.84 W/kg

Weight and Dimensions

Depth	8.8 mm
Width	77.3 mm
Height	163.5 mm
Weight	196.8 g