Huawei P smart Z User Manual

l Fingerprint unlocking is only available when your unlock method is set to Pattern, PIN or
Password. You will be required to unlock your Phone using the screen unlock password after
the device is restarted or if your ngerprint is not recognised.
l Before enrolling a ngerprint, make sure your nger is clean and dry.
1 Open Settings.
2
Go to Security & privacy > Fingerprint ID > Fingerprint management > Change unlock
method, select Pattern, 4-digit PIN, Custom PIN or Password, and then follow the onscreen
instructions to set an unlock password.
3 Once you have set an unlock password, touch New ngerprint to enrol a ngerprint.
4 Place your ngertip on the ngerprint sensor. Press down lightly on the sensor until your device
vibrates. Repeat this step using different parts of your ngertip.
5 After enrolment is complete, touch OK.
To unlock the screen, simply place your
ngertip on the ngerprint sensor.
Add or Modify a Fingerprint
You can enrol a maximum of ve ngerprints on your device. You can also delete or rename your
ngerprints.
1 Open Settings.
2 Go to Security & privacy > Fingerprint ID > Fingerprint management.
3 Enter the screen unlock password and then follow the onscreen instructions to enter the
ngerprint conguration screen.
4 In the Fingerprint list section, you can:
l Enrol a new
ngerprint: Touch New ngerprint to enrol a new ngerprint.
l Rename or delete a ngerprint: Touch a previously enrolled ngerprint to rename or delete
it.
l Identify a ngerprint: Touch Identify ngerprint to identify and highlight enrolled
ngerprints.
Use a Fingerprint to Quickly Access Private Information
Tired of having to enter a password each time you want to access private information in your Safe or
a locked app? You can use your
ngerprint to quickly access your private information. This method is
convenient and safe.
1 Open Settings.
2 Go to Security & privacy > Fingerprint ID > Fingerprint management.
3 Enter the screen unlock password and then follow the onscreen instructions to enter the
ngerprint conguration screen. Enable Access Safe and Access App lock, and then follow the
onscreen instructions to enter the passwords.
Now you can:
Security and Privacy
56

Huawei P smart Z Specifications

General

RAM capacity	4 GB
Memory card slot type	Hybrid slot
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	512 GB
Internal storage capacity	64 GB
Color name	Midnight Black
Form factor	Bar
Product color	Black
Wi-Fi	Yes
4G standard	LTE
2G standards	GSM
3G standards	WCDMA
SIM card type	NanoSIM
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
SIM card capability	Hybrid Dual SIM
Mobile network generation	4G
Platform	Android
Operating system installed	Android 9.0
Panel type	LTPS
Screen shape	Flat
Pixel density	391 ppi
Display diagonal	6.59 \
Touch technology	Multi-touch
Touchscreen type	Capacitive
Display resolution	2340 x 1080 pixels
Native aspect ratio	19.5:9
Display number of colors	16.78 million colors
Graphics card	Mali-G51
Wireless charging	-
Flash type	LED
Rear camera type	Dual camera
Front camera type	Single camera
Video recording modes	1080p
Rear camera aperture number	1.8
Front camera aperture number	2.2
Front camera resolution (numeric)	16 MP
Second rear camera resolution (numeric)	2 MP
USB connector type	USB Type-C
Subscription type	No subscription
Talk time (3G)	- h
Battery capacity	4000 mAh
Processor cores	4
Processor family	Hi-Silicon
Processor frequency	2.2 GHz
Coprocessor frequency	1.7 GHz
Processor lithography	12 nm
Processor architecture	ARM Cortex-A73
Coprocessor architecture	ARM Cortex-A53
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Harmonized System (HS) code	85171300
Head SAR (EU)	0.84 W/kg

Weight and Dimensions

Depth	8.8 mm
Width	77.3 mm
Height	163.5 mm
Weight	196.8 g