EasyManua.ls Logo

Huawei P10 PLUS - Page 52

Huawei P10 PLUS
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecting to a Wi-Fi network using Wi-Fi Protected Setup (WPS)
WPS allows your device to connect to a WPS-enabled router without entering a password.
1 Go to Settings.
2 T
ouch Wi-Fi and switch on Wi-Fi.
3 Touch
> Advanced W
i-Fi settings. There are two options:
l Touch WPS connection and press the router's WPS button.
l Touch WPS PIN connection to generate a PIN, and then enter the PIN on the router.
Using Wi-Fi+
When Wi-Fi+ is enabled, your device will automatically enable or disable Wi-Fi and connect to
the Wi-Fi network with the best signal.
You may incur additional data charges when downloading large files or watching online
videos over mobile data. To avoid incurring excessive data charges, purchase a data plan.
Contact your carrier for details.
1 Open Settings.
2 T
ouch Wi-Fi > Wi-Fi+ and turn on the Wi-Fi+ switch.
When Wi-Fi+ is enabled, your device will record your Wi-Fi connection history and monitor your
signal strength and location. This information is then used to enable or disable Wi-Fi and
connect to the Wi-Fi network with the strongest signal.
Using a QR code to share your Wi-Fi hotspot
Create a QR code to share your device's Wi-Fi hotspot with friends.
l QR codes can be generated for the following wireless encryption methods: WP
A, WPA2,
WEP, WPA-PSK, and WPA2-PSK. You cannot use a QR code to connect to WLAN
networks that are encrypted using the EAP protocol.
l Ensure that the connecting device supports using QR codes to import Wi-Fi network
credentials.
1 Go to
Settings.
2 Select W
i-Fi and turn on the Wi-Fi switch.
3 Once connected, touch the name of the network to generate a QR code.
4 On the connecting device, touch the center of the screen and swipe down. Touch
, scan
the QR code, and then follow the onscreen instructions to connect to the Wi-Fi hotspot.
T
ransferring data using Wi-Fi Direct
Wi-Fi Direct lets you transfer data directly between two Huawei devices without connecting to a
Wi-Fi network. Wi-Fi Direct is similar to Bluetooth, but offers faster transfer speeds, making it
suitable for sharing larger files.
Network and Sharing
46

Table of Contents

Other manuals for Huawei P10 PLUS

Related product manuals