Unboxing your Phone
Inserting a SIM card and microSD card
Y
our phone features a 2-in-1 SIM card slot. You can insert two nano-SIM cards, or one nano-SIM
card and one microSD card.
l The SIM card slot only supports nano-SIM cards. Contact your carrier for a new or
replacement nano-SIM card.
l Only use standard nano-SIM cards to avoid damaging the SIM card tray.
l Ensure that the card is in the correct position and keep the card tray level when inserting it into
your device.
l Be careful not to hurt yourself or damage your device when using the SIM eject pin.
l Store the SIM eject pin out of the reach of children to prevent accidental swallowing or injury.
l The SIM eject pin should only be used to eject the SIM card tray. Inserting the SIM eject pin
into other holes may damage your device.
1 Touch and hold the power button and touch
to turn off your device.
2 T
o remove the card tray, insert the SIM eject pin included with your device into the small hole
next to the card tray.
Nano-SIM
microSD
Nano-SIM
Nano-SIM
3 Insert a SIM card or microSD card into the card tray
.
4 Insert the card tray back into your phone in the correct orientation.
Charging your device
Your device displays a low battery warning when the battery is nearly empty. Charge your device
immediately to prevent it from switching off automatically.
Using a charger to charge your device
Connect your device to a socket using the factory-provided charger and USB cable.
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
