Huawei P40 Pro - Page 61

Automatic Volume Measurement
1 Make sure Auto is turned on. Frame the object in the viewnder and slowly move your
phone to locate the plane.
2 When your phone identies the object and displays a frame, touch .
3 Your phone will automatically display the result.
Drag the frame to ne-tune the measurement result.
Manual Volume Measurement
1 Turn o Auto. Frame the object in the viewnder and slowly move your phone to locate
the plane.
2 Point at the tip of the object's bottom edge and touch to mark the starting
point.
3 Move your phone slowly so that
travels along the long edge of the object. When it
reaches the end of the edge, touch .
4 Move your phone to create a frame for the bottom of the object. When the frame
overlaps with the bottom plane, touch .
Smart Features
57