To Next PageTo Next PageWhat to do if the indicators of the Huawei Power distribution unit monitoring board do not light up?
If the indicators on the monitoring board of your Huawei Power distribution unit aren't lighting up, it could be due to improperly connected cables. In this case, replace the monitoring board. Alternatively, the monitoring board itself might be faulty, and you should contact Huawei technical support for assistance.
Why is the LCD black or blinking on my Huawei PDU8000?
If the LCD on your Huawei Power distribution unit is black or blinking, first ensure that the input CAN cable is securely connected. If the issue persists, the LCD itself may be faulty and you should replace the MDU.
How to troubleshoot an LCD that fails to display branch currents on a Huawei PDU8000 Power distribution unit?
If the LCD of your Huawei Power distribution unit isn't displaying branch currents, it could be due to a loose or incorrect connection of the monitoring board communications cable or the secondary cable to the corresponding branch current transformer. In this case, replace the monitoring board. Another possibility is that the current monitoring board or current transformer is faulty, and you should contact Huawei technical support.
What to do if the Huawei Power distribution unit LCD fails to display the circuit breaker status?
If the LCD isn't showing the circuit breaker status on your Huawei Power distribution unit, it might be because the communications cable of the Boolean value collection module or the corresponding branch Boolean value signal cable isn't properly connected. In this case, replace the monitoring board. It could also mean that the Boolean value collection module or auxiliary switch contact is faulty, in which case you should contact Huawei technical support.
What to do if the indicators of the monitoring board do not light up on Huawei PDU8000 Power distribution unit?
If the indicators on the monitoring board of your Huawei Power distribution unit are not lighting up, it could be due to improperly connected cables. Alternatively, the monitoring board itself might be faulty.
Why does the LCD fail to display branch currents on my Huawei PDU8000?
The LCD on your Huawei Power distribution unit might fail to display branch currents if the monitoring board communications cable or the secondary cable to the corresponding branch current transformer is not properly connected. Another potential cause is a faulty current monitoring board or current transformer.
What to do if the LCD fails to display the circuit breaker status on Huawei PDU8000?
The LCD on your Huawei Power distribution unit may not display the circuit breaker status if the communications cable of the Boolean value collection module or the corresponding branch Boolean value signal cable is not properly connected. Another possibility is that the Boolean value collection module or auxiliary switch contact is faulty.
General| Model | PDU8000 Series |
|---|---|
| Series | PDU8000 |
| Input Frequency | 50/60 Hz |
| Product Type | Power Distribution Unit |
| Rated Current | 16A, 32A |
| Maximum Output Current | 16A, 32A |
| Number of Outlets | 8, 24 |
| Mounting | Vertical or Horizontal |
| Operating Humidity | 5% to 95% (non-condensing) |
| Certifications | CE, UL |
