Huawei PDU8000 Series - Preparing Tools

4
Preparing Tools2.2
Solid wrench
Wire stripper
Phillips screwdriver
Hydraulic pliers
Crimping tool
Diagonal pliers
Insulated torque
wrench
Socket wrench set
Protective gloves
Insulated gloves
Cable tie
Rubber mallet
Electrician's knife
Clamp meter
Hammer drill
Level
Measuring tape
Heat gun
Step ladder (2 m)
Protective shoes
Insulation tape
This table may not list some tools
required at specific sites. Onsite
installation personnel and technical
support personnel should prepare tools
based on site requirements.
NOTE
Flat-head
screwdriver
Preparing Consumables2.3
(Optional) Prepare firestop putty for sealing cable holes after cable connection. The fire retardant
bags are to be purchased by the customer.