Huawei PDU8000 Series - Safety Precautions; General Safety Precautions

11
Preparing Terminals
5.2
The following figures show how to prepare DT, OT, and cord end terminals.
Preparing a DT terminal
Preparing an OT terminal
Terminals must be coated with a
heat shrink tubing.
(1) Cable
(2) Heat shrink tubing
(3) DT terminal
(4) Hydraulic pliers
(5) Heat gun
(1) Cable
(2) Heat shrink tubing
(3) OT terminal
(4) Hydraulic pliers
(5) Heat gun
Preparing a cord end terminal
(1) Cable
(2) Cord end terminal
(3) Crimping tool