10
1. Install an AC input power cable.
2. Cover a PVC corrugated pipe over the cable part outside the cabinet and secure the PVC
corrugated pipe to the cable hole.
Installing an AC Input Power Cable
5.2
In a parallel system, the
length and model of the
cable between the cabinet
and the DGs must be the
same.
Single ICC cabinet
5
Installing Cables
1. Connect the DC input power cable between the solar junction box (SJB) and the cabinet
(using one PV input as an example).
2. Cover a PVC corrugated pipe over the cable part outside the cabinet and secure the PVC
corrugated pipe to the cable hole.
Installing a PV Input Power Cable
5.1
• Ensure that the upstream AC input circuit breaker is OFF, and that the warning label "Do
not operate" is attached.
• Switch off all circuit breakers before installing the power cable.
To Next Page
Loading...
