14
Installing Cables Between the ICC Cabinet and the Isolation Transformer
5.5
1. Install surge protection, high-temperature, and overtemperature alarm signal cables between
the ICC cabinet and the isolation transformer.
• Connecting multiple lithium battery cabinets to the ICC in parallel, with an optional
combiner box
UIM02C of the ICC cabinet
Alarm cable ports of the
isolation transformer
4. Lay out the cables based on the instructions, and bind them using cable ties.
5. Cover a PVC corrugated pipe over the cable part outside the cabinet and secure the PVC
corrugated pipe to the cable outlet.
To Next Page
Loading...
