Huawei Quidway S5300 Series User Manual

7. Verify the configuration.
<S-switch-A> telnet 127.0.0.1
Trying 127.0.0.1 ...
Press CTRL+T to abort
Connected to 127.0.0.1 ...
***********************************************************
* All rights reserved (2000-2007) *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
* Notice: *
* This is a private communication system. *
* Unauthorized access or use may lead to prosecution. *
***********************************************************
Login authentication
Username:huawei
Password:
Note: The max number of VTY users is 15, and the current number
of VTY users on line is 3.
<S-switch-A>
Configuration Files
l S-switch-A
#
sysname S-switch-A
#
vlan batch 1
........
#
interface Vlanif1
ip address 10.10.10.10 255.255.255.0
.......
interface GigabitEthernet0/0/24
port link-type trunk
port trunk allow-pass vlan 1
.....
aaa
local-user huawei password simple huawei
local-user huawei service-type telnet
local-user huawei level 15
authentication-scheme default
#
authorization-scheme default
#
accounting-scheme default
#
domain default
#
user-interface con 0
user-interface vty 0 4
authentication-mode aaa
Quidway S5300 Series Ethernet Switches
Quick Start 1 Quick Start
Issue 01 (2008-12-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-5

Huawei Quidway S5300 Series Specifications

General

Brand	Huawei
Model	Quidway S5300 Series
Category	Switch
Language	English