Huawei S1720 Series Quick Maintenance Guide

How to Quickly Maintain the
S1720&S2700&S3700&S5700&S6700
Start
Check indicators
and rectify the fault.
Check alarms on
the switch and
rectify the fault.
Check the health
status of the switch
and rectify the fault.
Check the component
status of the switch and
rectify the fault.
Is the fault
rectified?
Collect and report
the fault information.
End
Yes
No
The overall S1720&S2700&S3700&S5700&S6700 maintenance process is as follows:
2
To check the alarms, health status, component status, and record fault
information, you must log in to the switch through the Console port, Telnet, or
STelnet. (For how to log in to the switch, see Configuration Guide-Basic
Configuration.) If you fail to log in to the switch, see Solution to Device Login
Failure.

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm