Huawei S5700 Series

Figure 5-2 Configuring the interface for connection
Step 4 Set communication parameters.
When the COM1 Properties dialog box is displayed as shown in Figure 5-3, specify the
parameters listed in Table 5-1.
NOTE
In other Windows operating systems, bits per second may be described as baud rate and data stream control
may be described as traffic control.
S3700&S5700&S6700 Series Ethernet Switches
Quick Start 5 Logging in to the Device
Issue 02 (2012-09-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
56