Huawei SUN2000-115KTL-M2 User Manual

B Resetting Password
Step 1 Check that the AC and DC sides of the inverter are both powered on, and
indicators
and are steady green or blinking slowly for more than 3 minutes.
Step 2 Turn o the AC switch, set the DC SWITCH at the bottom of the inverter to OFF,
and wait until all LED indicators on the inverter panel turn o.
Step 3 Complete the following operations within 4 minutes:
1. Turn on the AC switch and wait for about 90s or until the inverter indicator
blinks.
2. Turn
o the AC switch and wait about 30s or until all LED indicators on the
inverter panel turn o.
3. Turn on the AC switch and wait for about 90s or until the inverter indicator
blinks.
Step 4 Log in to the app and reset the password within 10 minutes. (If no operation is
performed within 10 minutes, all parameters of the inverter remain unchanged.)
----End
NO TICE
You are advised to reset the password in the morning or at night when the solar
irradiance is low.
SUN2000-(100KTL, 110KTL, 115KTL)-M2
User Manual B Resetting Password
Issue 07 (2023-04-30) Copyright © Huawei Technologies Co., Ltd. 143

Huawei SUN2000-115KTL-M2 Specifications

General

Rated Output Power	115 kW
Input Voltage Range	200 V - 1000 V
Max. DC Voltage	1100 V
Maximum DC Input Voltage	1100 V
Start Voltage	200 V
Rated AC Power	115 kW
Maximum AC Output Power	115 kW
Rated AC Voltage	400 V
Rated AC Frequency	50 Hz / 60 Hz
AC Output Frequency	50 Hz / 60 Hz
Max. Efficiency	98.6%
MPPT Efficiency	99.9%
Operating Temperature Range	-25 °C to +60 °C
Protection Degree	IP65
MPPT Voltage Range	200 V - 1000 V
Max. Apparent AC Power	126500 VA
Power Factor Adjustment Range	0.8 leading - 0.8 lagging
Max. DC Power	172500 W
Maximum DC Input Power	172500 W
Max. Output Current	182 A
Cooling	Forced air cooling
Cooling Method	Forced air cooling