8
a. 3-pin SUN2000-42KTL
(excluding the ground cable)
b. 3-pin SUN2000-42KTL
(including the ground cable)
M8
8 N·m
M8
8 N·m
M6
5 N·m
c. 4-pin SUN2000-42KTL (excluding the
ground cable and neutral wire)
d. 4-pin SUN2000-42KTL (including the
ground cable but excluding the neutral
wire)
M8
8 N·m
M8
8 N·m
M6
5 N·m
e. SUN2000-29.9KTL/33KTL-A/36KTL
(excluding the ground cable and neutral wire)
f. SUN2000-29.9KTL/33KTL-A/36KTL
(including the ground cable but
excluding the neutral wire)
M8
8 N·m
M8
8 N·m
M6
5 N·m
• Ensure that the AC output power cable is connected securely. Otherwise, the SUN2000 may fail
to operate or experience a fault that will damage the terminal block. For example, the SUN2000
may generate heat during operation due to unreliable connection.
• If the SUN2000 is insecurely installed and the AC output power cable bears the pulling force,
ensure that the last cable bearing the force is the PE cable.
To Next Page
Loading...
