Huawei SUN2000-29.9KTL - Installing DC Input Power Cables

9
Installing DC Input Power Cables
4.4
g. SUN2000-29.9KTL/33KTL-A/36KTL
(excluding the ground cable but
including the neutral wire)
h. SUN2000-29.9KTL/33KTL-A/36KTL
(including the ground cable and neutral wire)
M8
8 N·m
M8
8 N·m
M6
5 N·m
11.Use a torque wrench with an open end of 65 mm to tighten the locking cap to a torque of 7.5 N·m,
and seal the waterproof connector.
Selecting DC input terminals
Number of Inputs
SUN2000
1
Connects to any route.
2
Connects to routes 1 and 5.
3
Connects to routes 1, 3, and 5.
4
Connects to routes 1, 3, 5, and 7.
5
Connects to routes 1, 2, 3, 5, and 7.
6
Connects to routes 1, 2, 3, 5, 6, and 7.
7
Connects to routes 1, 2, 3, 4, 5, 6, and 7.
8
Connects to routes 1, 2, 3, 4, 5, 6, 7, and 8.
The SUN2000 provides two DC switches,
namely, DC SWITCH 1 and DC SWITCH 2.
DC SWITCH 1 controls the first to fourth
routes of DC input terminals, whereas DC
SWITCH 2 controls the fifth to eighth routes
of DC input terminals.
NOTE