25
SmartLogger Networking Scenario
6.6
1. Access Device commissioning.
Device Commissioning
7.1
Scenario 1: Your phone is not
connected to the Internet.
Scenario 2: Your phone is
connected to the Internet.
When your phone is
connected to the Internet,
Device commissioning is
not displayed after you
tap ....
7
FAQ
SmartLogger1000A SmartLogger3000
For details, see the
Distributed PV Plants Connecting to Huawei Hosting Cloud Quick Guide
(Distributed Solar Inverters + SmartLogger1000A + RS485 Networking)
and
PV Plants
Connecting to Huawei Hosting Cloud Quick Guide (Inverters + SmartLogger3000 + RS485
Networking)
. You can scan the QR codes to obtain the documents.
If the solar inverter connects to batteries, set battery parameters.
Setting Battery Parameters
6.5
1. Log in to the FusionSolar app and choose My >
Device commissioning. The Device commissioning
screen (Refer to 7.1 Device Commissioning.) is
displayed.
2. Choose Power adjustment > Battery control and set
battery parameters, including Charge from grid,
Control mode (Fixed charge/discharge, Maximum
self-consumption, Time-of-use), Forced
charge/discharge, and so on.
To Next Page
Loading...
