Huawei Swisscom B593s

7
 On: Off-hook condition
○
5
Mode indicator
 Steady blue: The CPE is connected to an LTE network, but no data is being
transmitted.
 Blinking blue: The CPE is connected to an LTE network and is transmitting data.
 Steady green: The CPE is connected to a UMTS network, but no data is being
transmitted.
 Blinking green: The CPE is connected to a UMTS network and is transmitting data.
 Steady yellow: The CPE is connected to a GSM network, but no data is being
transmitted.
 Blinking yellow: The CPE is connected to a GSM network and is transmitting data.
 Steady red: The CPE failed to connect to a wireless network.
 Steady purple: The SIM card is not recognized, the PIN has not been entered, or the
PIN verification failed.
○
6
Signal indicator
 On: Indicates network signal strength. Full light indicates strong signal.