Huawei Quidway S9300

Quidway S9300 Terabit Routing Switch
V100R003C00
Configuration Guide - Network
Management
Issue 03
Date 2010-09-20
HUAWEI TECHNOLOGIES CO., LTD.

Huawei Quidway S9300 Specifications

General

Operating Temperature	0°C to 45°C
Switching Mode	Store-and-forward
Product Series	S9300
Product Type	Switch
Switching Capacity	25.6Tbit/s
Backplane Bandwidth	25.6 Tbps
VLAN	4094
MAC Address Table Size	256K

Summary

1 SNMP Configuration

1.3 Configuring Basic Functions of SNMPv1

Describes how the NM Station accesses and manages the device through SNMPv1.

1.4 Configuring Basic Functions of SNMPv2 c

Describes how the NM Station accesses the device through SNMPv2c.

1.5 Configuring Community-Name-based Access Control in SNMPv1

Describes how to implement the security feature of SNMPv1 through access control lists (ACLs).

1.9 Configuring Basic Functions of SNMPv3

Describes how the NM Station accesses the device through SNMPv3.

1.10 Configuring Group-based Access Control in SNMPv3

Configures access control for SNMPv3 users based on groups.

1.11 Configuring User-based Access Control in SNMPv3

1.12 Configuring Authentication and Encryption Functions in SNMPv3

1.23 Configuration Examples

Provides several configuration examples for SNMP.

2 RMON and RMON2 Configuration

2.3 Configuring RMON

2.4 Configuring RMON2

2.6 Configuration Examples

Provides several configuration examples of RMON and RMON2.

3 NTP Configuration

3.3 Configuring Basic NTP Functions

3.4 Configuring NTP Security Mechanisms

3.6 Configuration Examples

Provides several configuration examples of NTP.

4 LLDP Configuration

4.3 Configuring LLDP

4.5 Configuration Examples

Provides several configuration examples of LLDP.

5 Ping and Tracert

5.3 Performing Ping and Tracert Operations

5.5 Configuration Examples

Provides a configuration example of ping and tracert operations.

6 NQA Configuration

6.5 Configuring the ICMP Test

6.6 Configuring the FTP Download Test

6.7 Configuring the FTP Upload Test

6.8 Configuring the HTTP Test

6.16 Configuring the LSP Ping Test

6.17 Configuring the LSP Jitter Test

6.29 Configuring an NQA Test Group

6.37 Configuration Examples

Provides several configuration examples of NQA.

7 NetStream Configuration

7.3 Collecting IPv4 Traffic Statistics

7.4 Collecting IPv6 Traffic Statistics

7.6 Configuring the Flexible NetStream Feature

7.9 Example for Configuring NetStream

Provides several configuration examples of NetStream.

8 HGMP Configuration

8.2 Configuring Basic HGMP Functions

8.3 Configuring Advanced HGMP Functions

8.5 HGMP Configuration Examples

Provides several configuration examples of HGMP.