EasyManuals Logo

Huawei Quidway S9300 User Manual

Huawei Quidway S9300
630 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
Procedure
Step 1 Run:
system-view
Step 2 Run:
rmon2 protocoldirtable protocoldirid protocol-id parameter parameter-value [ descr
description-string ] [ host { notsupported | supportedon | supportedoff } ]
[ owner owner-name ] [ status { active | inactive } ]
The protocolDirTable is configured.
The RMON2 supports the traffic statistics of IP packets only on Ethernet interfaces. Since a
single protocol corresponds to an entry, this table currently has only one entry.
l When an entry is created or the entry status (protocolDirStatus) is set to active, both
parameter (equivalent to protocolDirDescr) and host (equivalent to
protocolDirHostConfig) must be set at the same time.
l When the protocolDirStatus is set to active, the value in the protocolDirDescr cannot be
changed.
– If the protocolDirHostConfig value is notsupported, it cannot be changed into other
values.
– If the value is not notsupported, it can be switched between supportedon and
supportedoff.
– When the protocolDirHostConfig value changes from supportedon to supportedoff, the
corresponding entry in the hlHostControlTable is deleted.
l When the protocolDirStatus is set to inactive, the corresponding entry in the hlHostTable is
deleted.
----End
2.4.4 Checking the Configuration
After configuring RMON2, you can view the traffic statistics collected by RMON2.
Prerequisite
The configurations of the RMON2 are complete.
Procedure
Step 1 Run the display rmon2 protocoldirtable command to view the information about the
protocolDirTable.
Step 2 Run the display rmon2 hlhostcontroltable [ index ctrl-index ] command to view the
information about the hlHostControlTable.
Step 3 Run the display rmon2 nlhosttable [ hostcontrolindex ctrl-index ] [ timemark time-value ]
[ protocoldirlocalindex protocol-local-index ] [ hostaddress ip-address ] command to view
the information about the nlHostTable.
----End
2 RMON and RMON2 Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
2-14 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)

Table of Contents

Other manuals for Huawei Quidway S9300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S9300 and is the answer not in the manual?

Huawei Quidway S9300 Specifications

General IconGeneral
BrandHuawei
ModelQuidway S9300
CategoryNetwork Router
LanguageEnglish

Related product manuals