Huawei Quidway S9300

Example
Run the display snmp-agent community command. If information on the community name is
displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent community
Community name:public
Group name:public
Storage-type: nonvolatile
Community name:private
Group name:private
Storage-type: nonvolatile
Run the display snmp-agent sys-info version command. If the version of SNMP run on the
agent is displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent sys-info version
SNMP version running in the system:
SNMPv2c SNMPv3
1.5 Configuring Community-Name-based Access Control in
SNMPv1
This section describes how to implement the security feature of SNMPv1 through access control
lists (ACLs).
1.5.1 Establishing the Configuration Task
Before configuring community-name-based access control in SNMPv1, familiarize yourself
with the applicable environment, complete the pre-configuration tasks, and obtain the required
data. This can help you complete the configuration task quickly and accurately.
1.5.2 Configuring the SNMP Version
By default, the NM Station accesses the device through SNMPv3. To enable the NM Station to
access the device through SNMPv1, you need to configure SNMPv1 on the device.
1.5.3 Configuring a Basic ACL
This part describes how to configure the ACL to specify the IP address of the NMS allowed to
access the device.
1.5.4 Applying the ACL
This part describes how to configure ACLs to enable a specific NM Station to access the device.
1.5.5 Checking the Configuration
After community-name-based access control in SNMPv1 is configured, you can view
configurations of SNMP and ACLs.
1.5.1 Establishing the Configuration Task
Before configuring community-name-based access control in SNMPv1, familiarize yourself
with the applicable environment, complete the pre-configuration tasks, and obtain the required
data. This can help you complete the configuration task quickly and accurately.
Applicable Environment
To configure the specified NM Station to manage the switch (SNMP agent), configure access
control lists (ACLs) on the switch.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 1 SNMP Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-11