l Run the display snmp-agent sys-info version command to view the SNMP version
information.
----End
Example
Run the display snmp-agent group command. If information on the USM-based group is
displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent group
Group name: gg
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: ViewDefault
Notifyview : <no specified>
Storage-type: nonVolatile
Run the display snmp-agent mib-view command. If information on the MIB view is displayed,
it means that the configuration succeeds.
<Quidway> display snmp-agent mib-view
View name:ViewDefault
MIB Subtree:internet
Subtree mask:
Storage-type: nonVolatile
View Type:included
View status:active
Run the display snmp-agent usm-usercommand. If information on the SNMP user is displayed,
it means that the configuration succeeds.
<Quidway> display snmp-agent usm-user
User name: u1
Engine ID: 000007DB7F00000100000772 active
Run the display snmp-agent sys-info version command. If the version of SNMP run on the
agent is displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent sys-info
SNMP version running in the system:
SNMPv3
1.14 Configuring SNMP Maintenance Information
This section describes how to maintain the device through SNMP maintenance information.
1.14.1 Establishing the Configuration Task
Before configuring SNMP maintenance information, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
1.14.2 Configuring Contact Methods of the Administrator
This part describes how to configure the administrator information. In the case of device failure,
you can contact the administrator for help.
1.14.3 Configuring the Location of the switch
This part describes how to assign an address to the device. In the case of device failure, you can
locate the faulty device in time.
1.14.4 Checking the Configuration
After SNMP maintenance information is configured, you can view information about the
administrator and location of the device.
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-44 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
To Next Page
Loading...
Need help?
General
