8 HGMP Configuration
About This Chapter
By running the Huawei Group Management Protocol (HGMP), you can appoint a switch as the
administrator switch to create a cluster and add a large number of Ethernet switches to the cluster.
The administrator is used to perform unified management and configuration over these switches,
which simplifies maintenance and engineering.
8.1 Overview
This section describes the basic principles and typical networking of HGMP, and HGMP features
supported by the S9300.
8.2 Configuring Basic HGMP Functions
This section describes how to configure basic HGMP functions to create or manage a cluster.
8.3 Configuring Advanced HGMP Functions
This section describes how to configure advanced HGMP functions to simplify the management
and maintenance of a basic cluster.
8.4 Maintaining HGMP
This section describes how to clear the statistics on NDP, monitor the operation status of the
HGMP cluster, and debug NDP, NTDP, and the HGMP cluster.
8.5 HGMP Configuration Examples
This section provides several configuration examples of HGMP.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 8 HGMP Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-1
To Next Page
Loading...
Need help?
General
