1.2 SNMP Supported by the S9300
This part describes the support for SNMPv1, SNMPv2c, and SNMPv3 on the S9300.
The S9300 supports SNMPv1, SNMP2vc, and SNMPv3.
SNMPv1
l Supporting community-name-based access control
l Supporting MIB-view-based access control
l Supporting Traps
SNMPv2c
l Supporting community-name-based access control
l Supporting MIB-view-based access control
l Supporting Traps and Informs
SNMPv3
SNMPv3 inherits basic operations in SNMPv2c. It defines a management frame, imports
Universal Server Manager (USM), and provides a security mechanism for access users.
l Supporting user group
l Supporting group-based access control
l Supporting user-based access control
l Supporting authentication and encryption mechanisms
l Supporting Traps
1.3 Configuring Basic Functions of SNMPv1
This part describes how the NM Station accesses and manages the device through SNMPv1.
1.3.1 Establishing the Configuration Task
Before configuring SNMPv1, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
1.3.2 Enabling Basic SNMP Functions
By default, SNMP is disabled.
1.3.3 Configuring the SNMP Version
By default, the NM Station accesses the device through SNMPv3. To enable the NM Station to
access the device through SNMPv1, you need to configure SNMPv1 on the device.
1.3.4 Setting the SNMP Community Name
This part describes how to implement access right control by setting the SNMP community
name.
1.3.5 Checking the Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 1 SNMP Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-5
To Next Page
Loading...
Need help?
General
