Huawei Quidway S9300 User Manual

l Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 120 130
#
interface Vlanif120
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif130
ip address 30.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 120
port hybrid untagged vlan 120
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 130
port hybrid untagged vlan 130
#
ospf 1
area 0.0.0.1
network 10.1.1.0 0.0.0.255
network 30.1.1.0 0.0.0.255
#
return
l Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 130
#
interface Vlanif130
ip address 30.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 130
port hybrid untagged vlan 130
#
nqa-server udpecho 30.1.1.2 9000
#
ospf 1
area 0.0.0.1
network 30.1.1.0 0.0.0.255
#
return
6.37.28 Example for Configuring Test Results to Be Sent to the FTP
Server
This part provides examples for sending send test results to the FTP server to save test results
to the most extent.
Networking Requirements
As shown in Figure 6-30, Switch A serves as the client to perform the ICMP test and send test
results to the FTP server through FTP.
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-232 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)

Huawei Quidway S9300 Specifications

General

Brand	Huawei
Model	Quidway S9300
Category	Network Router
Language	English