Huawei Quidway S9300 - Example for Configuring the Batch Distribution Function for an HGMP Cluster

ntdp enable
ndp enable
#
cluster
mngvlanid 10
administrator-address 0001-0001-0001 name HUAWEI
#
ip route-static 3.0.0.0 255.0.0.0 10.0.0.1
#
snmp-agent
snmp-agent target-host trap address udp-domain 3.0.0.1 params securityname
cluster
#
return
8.5.6 Example for Configuring the Batch Distribution Function for
an HGMP Cluster
Networking Requirements
As shown in Figure 8-8, all the Layer 2 switches belong to the same cluster. Administrator-1 is
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
Member-2 and Member-3 are required to download configuration files in batches from the FTP
server.
8 HGMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8-84 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)