Huawei Quidway S9300

#
return
l Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 100 110
#
interface Vlanif100
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif110
ip address 10.2.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
return
l Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 110
#
interface Vlanif110
ip address 10.2.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
#
snmp-agent
snmp-agent local-engineid 000007DB7F00000100006294
#
return
6.37.8 Example for Configuring the TCP Test
Networking Requirements
As shown in Figure 6-10, the NQA TCP Private test is used to obtain the time for setting up a
TCP connection between Switch A and Switch B.
Figure 6-10 Networking diagram for configuring the TCP test
SwitchA
GE1/0/0
VLANIF100
10.1.1.1/24
VLANIF100
10.1.1.2/24
VLANIF110
10.2.1.2/24
VLANIF110
10.2.1.1/24
GE1/0/0 GE1/0/0GE2/0/0
SwitchCSwitchB
NQA Server
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management 6 NQA Configuration
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-155