Huawei Quidway S9300 User Manual

2 S9300 0002-0002-0002 10.0.0.2 success
3 S9300 0003-0003-0003 10.0.0.3 success
Interfaces running NDP and NTDP are not required on member switches. If NDP and NTDP
are disabled successfully, run the display member-interface-state command, and you can view
that success is displayed.
<HUAWEI_0.Quidway> display member-interface-state ndp
The result of member switches executed disable member interface command:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress result
------------------------------------------------------------------------------
3 S9300 0004-0004-0004 10.0.0.4 success
2 S9300 0003-0003-0003 10.0.0.3 success
1 S9300 0002-0002-0002 10.0.0.2 success
[HUAWEI_0.Quidway-cluster] display member-interface-state ntdp
The result of member switches executed disable member interface command:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress result
------------------------------------------------------------------------------
3 S9300 0004-0004-0004 10.0.0.4 success
2 S9300 0003-0003-0003 10.0.0.3 success
1 S9300 0002-0002-0002 10.0.0.2 success
If member switches are successfully restarted, run the display member-reboot-stat command,
and you can view that success is displayed.
<Quidway> display member-reboot-stat
The result of member switches rebooting:
------------------------------------------------------------------------
SN Device MacAddress IPAddress Result
------------------------------------------------------------------------
1 S9300 0002-0002-0002 10.0.0.2 success
2 S9300 0003-0003-0003 10.0.0.3 success
------------------------------------------------------------------------
If the current configurations are successfully saved on member switches, run the display
member-save-stat command, and you can view that success is displayed.
<Quidway> display member-save-stat
The result of member switches saving:
------------------------------------------------------------------------
SN Device MacAddress IPAddress Result
------------------------------------------------------------------------
1 S9300 0002-0002-0002 10.0.0.2 success
2 S9300 0003-0003-0003 10.0.0.3 success
------------------------------------------------------------------------
If member switches successfully synchronize configuration files to the FTP server, run the
display synchronization-result command, and you can view that success is displayed.
<Quidway> display synchronization-result
The result of member switches' synchronization:
------------------------------------------------------------------------------
SN Device MacAddress IpAddress result
------------------------------------------------------------------------------
1 S9300 0002-0002-0002 10.0.0.2 success
2 S9300 0003-0003-0003 10.0.0.3 success
3 S9300 0004-0004-0004 10.0.0.4 success
8.4 Maintaining HGMP
This section describes how to clear the statistics on NDP, monitor the operation status of the
HGMP cluster, and debug NDP, NTDP, and the HGMP cluster.
8.4.1 Clearing the NDP Statistics
8 HGMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)

Huawei Quidway S9300 Specifications

General

Brand	Huawei
Model	Quidway S9300
Category	Network Router
Language	English